background image

[email protected]  |  www.preso.com  |  www.badgermeter.com

Phone:  262-639-6770  |  Fax:  262-417-1148

Trademarks appearing in this document are the property of their respective entities.  

Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an 

outstanding contractual obligation exists. © 2012 Badger Meter, Inc. All rights reserved. 

The Americas | Badger Meter | 

4545 West Brown Deer Rd | PO Box 245036 | Milwaukee, WI 53224-9536 | 800-876-3837 | 414-355-0400

México | Badger Meter de las Americas, S.A. de C.V. | 

Pedro Luis Ogazón N°32 | Esq. Angelina N°24 | Colonia Guadalupe Inn | CP 01050 | México, DF | México | +52-55-5662-0882

Europe, Middle East and Africa | Badger Meter Europa GmbH | 

Nurtinger Str 76 | 72639 Neuffen | Germany | +49-7025-9208-0

Czech Republic | Badger Meter Czech Republic s.r.o. | 

Maříkova 2082/26 | 621 00 Brno, Czech Republic | +420-5-41420411

Slovakia | Badger Meter Slovakia s.r.o. | 

Racianska 109/B | 831 02 Bratislava, Slovakia | +421-2-44 63 83 01

Asia Pacific | Badger Meter | 

80 Marine Parade Rd | 21-04 Parkway Parade | Singapore 449269 | +65-63464836 

China | Badger Meter | 

Rm 501, N° 11 Longyue Apartment | N° 180 Longjin Rd, Jiuting Songjiang District | Shanghai, China | 201615 | +86-21-5763 5412 

Содержание PRESO Ellipse PFA Series













Отзывы: