Meter installation
Page 32
LM_OGP2Adv_BA_99_0045
May 2019
5.5
Apply nozzle to meter
1.
On the opposite end, apply sealant to the end of the nozzle.
Recommended sealant is Loctite
®
243.
2.
Thread the nozzle onto the meter. Screw it in tightly with an open
ended, adjustable, wrench.
3.
Open all dispense position shut-off valves. Start the pump to
pressurize the system.
4.
Before use, to ensure accuracy, purge all air from the fluid lines
and dispense valve(s).
5.
Attach the nozzle
