Register programming
Page 9/20
OG_IOG_BA_02_1401
8.3 Changing the meter pulse rate
(for models ILR 700, 710, 720 and 730)
The meter pulse rate (screen is indicated by the “I” on the top row, on the left side) is
the number of pulses per unit of measure as detected by the register. The pulse rate
varies according to the type of attached meter. The bottom row consists of the 5-digit
integer value of the meter pulse rate, whereas the top row consists of the 2-digit
decimal value of the meter pulse rate.
The meter pulse rate is entered in pulses per liter if the selected unit of measure is
liters. The meter pulse rate is entered in pulses per gallon if the selected unit of
measure is gallons, quarts or pints.
Figure 6: Meter Pulse Rate
1. Press the
TOTAL
button to select a digit (selected digits flash). Press
RESET
to
change the selected digit. The pulse rate can be any value between 00000.01 and
99999.99 on the top row; integer values are displayed on the bottom row.
Example: 10.45 would display .45 on the top row and 10 would be displayed on the
bottom
row.
2. When finished adjusting the pulse rate, press and hold the
TOTAL
button for one
second to advance to the “register orientation” section.
NOTE: Error checking will not allow the user to advance to the next screen.
8.4 Changing the register orientation
(for models ILR 700, 710, 720 and 730)
Depending on the orientation (perpendicular or inline on the meter); this setting may
need to be changed.
Figure 7: Register orientation
Flow
direction
Inline
Perpendicular
Содержание IOG Series
Страница 23: ......
