Product Overview
PRODUCT OVERVIEW
LCD Display
HR-LCD registers have a nine-digit Liquid Crystal Display (LCD) to show consumption, flow and alarm information .
There is no need to activate the display . The display automatically toggles between consumption (segmented leak detector in
this mode), rate of flow and meter model .
OTE:
N
Devices are shipped in storage mode so that a meter status alarm is not triggered . In storage mode, the meter model
screen is displayed .
Multiplier Value
Depending on the meter model, size and unit of measure, a multiplier value may also be shown . Multiply the displayed value
by the multiplier value to calculate the reading to the nearest gallon, cubic foot, or cubic meter .
Example: 123456 (displayed value) x 10 (multiplier value) = 1234560
Extended Visual
Reading Resolution
Typical Billing
Segments
Status
Indicators
IR Programming
Port
00/00
4-Digit
Date Code
E LCD
HR
Multiplier Value
(x10, x100, x1000, x10,000)
In 6-digit mode, the
last digit is a dashed
line that becomes a
flow finder
Figure 1: HR LCD register face
Visual Display
Units of Measure
The units of measure are factory-programmed and user-programmable . Options include U .S . gallons, Imperial gallons, cubic
feet, cubic meters and liters .
9-Digit Totalization
The consumption display includes all nine digits and a decimal point (based on meter model, size and unit of measure) . The
displayed value is the sum of the forward flow minus any reverse flow . This screen displays for 45 seconds .
Model 25 Disc Series Meter Calibrated in Gallons
4
GAL
Page 6
April 2020
REG-UM-02466-EN-02
