Badger Meter FC-5000, Руководство пользователя

Страница: 17 / 44

Operator Interface
Keypad and Soft Keys
The keypad and soft keys are for programming, editing and changing views�
Scrolling
The screens can display only 4 lines at a time� Some menus have more than 4
items to display� To see the off-screen items, press the UP/DOWN keys to scroll
through the entire list�
THE FLOW COMPUTER MAY BE OPERATED ONLY BY PERSONNEL WHO
ARE AUTHORIZED AND TRAINED BY THE FACILITY. OBSERVE ALL
INSTRUCTIONS IN THIS MANUAL. OBEY ALL SAFETY PRECAUTIONS
MENTIONED IN “SAFETY CONSIDERATIONS” ON PAGE 5 .
Control Panel Keys
OTEE: N
Always press (ENTER) to save a new value�
The numbered keys are used to enter or change parameter values�
In editing mode, the BACKSPACE key deletes the character to the left of
the cursor�
While navigating, the BACKSPACE key moves to a previous menu
selection�
Depending on the current screen, the ENTER key:
• Saves the current value and ends the editing session
• Advances deeper into the menu structure
• Toggles enumerations
The UP and DOWN keys have various functions:
• Toggles the display to view flow rate, total, or flow + total
• While editing, the UP/DOWN keys advance the cursor to the right or
left, respectively
• In the menu structure, the UP/DOWN keys scroll through the menus
and parameters
The F1-F4 function keys are soft keys that change
function to whichever icon is present above them�
See “Icon Functionality” on page 18
Table 1: Control panel keys
Page 17 July 2016 CTL-UM-01723-EN-01