Installation
December 2019
Seite 7
AC_F001_IA_02_2243
•
Make a selection: Press the SELECT key as many times as applicable, to make the required selection, or;
•
Make a setting: Use the SELECT key to increase the digit. Use the CLEAR key to go to the next number.
•
Save a change: Short and simultaneously, press the SELECT and CLEAR key to confirm the selection.
•
Leave the setup menu: Press and hold the SELECT key, for at least 3 seconds.
4. INSTALLATION
4.1. Mechanical installation
4.1.1. INTRODUCTION
When you install the F001 make sure:
•
the F001 is installed free from excessive vibrations;
•
the F001is protected against severe weather conditions.
WARNING
ONLY QUALIFIED AND WELL-TRAINED PERSONS WHO
ARE FAMILIAR WITH THE MECHANICAL INSTALLATION
AND THE SERVICE PROCEDURES AND WHO OBEY THE
SPECIFIC REGULATIONS AND THE REQUIREMENTS SET
BY THE AUTHORITIES, THE MANUFACTURER, THE
EMPLOYER AND THE PLANT OWNER, ARE ALLOWED TO
DO THE MECHANICAL WORK.
Figure 2: Installation - Introduction
4.1.2. REMOVE THE COVER
OTE:
N
The wiring and the electronics are attached to the inside of the cover.
1. Remove and keep the screws (2) to release the cover (1).
2. Carefully, remove and hold the cover (1).
3. Inspect the seal for signs of deterioration.
4. Do any necessary work.
Figure 3: Remove the cover
Содержание F001
Страница 27: ...December 2019 Seite 23 AC_F001_IA_02_2243...
