Page 17
3-11
Installation & Operation Manual
8.
When communication has been confirmed, Click on the
Parameters
button.
Figure 21: Parameters Screen
9.
From this screen we will set up the following:
1. Flow Sensor Type, Scaling, and units.
2. Temperature Sensor Type, Units, Mode, and Zeroing.
3. Energy Calculation Units of Measure
4. Filter Coefficients ( Flow and Energy averaging for reading stability)
5. Scaled Pulse Output resolution and pulse width
6. RS-485 Network Configuration ( BACnet or Modbus)
Be sure to press
Send
before leaving this page to save any wanted changes.
Defaults
will restore all factory settings.
Exit
returns to the Main Screen.
Figure 22: Parameter Screen Buttons