5
(Dealer Copy)
PRE-DELIVERY CHECK LIST
After the Forage Blower has been completley set-
up, check to be certain it is in correct running order
before delivering it to the customer. The following is
a list of poins to inspect. Check off each item as
you have made the proper adjustments and found
the item operating satisfactorily. Any adjustment
must be made according to specifications defined in
this manual.
[ ] All shields and guards are in place and fastened.
[ ] All covers are clsoed and latched.
[ ] Blower band tightened, per instructions on pages
28-30.
[ ] All grease fittings have been lubricated. See
"lubrication" section in this manual, pages 34-35
[ ] Auger clearances are porperly adjusted. See
instructions, page 33.
[ ] All drive belts are at proper tension. See "Adjust-
ments" section in this manual, pages 31-32.
[ ] All bolts and other fasteners are tight.
[ ] PTO shields turn freely and porper shear bolts are
installed.
[ ] Fan shear bar and auger are adjusted properly.
See "Adjustments" section in this manual.
Dealer's Name
__________________________________________
Signature of Pre-Delivery Inspector
__________________________________________
Date of Inspection
__________________________________________
Model No.
__________________________________________
Serial No.
__________________________________________
FORAGE BLOWER
DELIVERY CHECK LIST
The following check list is an important reminder
of valuable information that MUST be passed on to
the customer at the time the unit is delivered. Check
off each item as you explain it to the customer
[ ] Give the customer the Operator's Manual. In-
struct them to be sure to read and completely
understand its contents BEFORE attempting to
operate the unit.
[ ] Explain the precautionary statement section of the
manual
[ ] Explain and review with the customer how to
tighten and importance of keeping blower band tight,
pages 28-30 in this manual.
[ ] Explain that regular lubrication and proper adjust-
ments are required for continued proper operation
and long life. Review with the customer the Mainte-
nance and Adjustments in the section of this
manual.
[ ] Advise the customer to check both belts for
proper tension after the second load has been
unloaded and to continue to check the tension until
the initial stretch in the belts disappears.
[ ] Complete the Delivery Registration Card and have
customer sign it and return it to Art's-Way Manufac-
turing.
[ ] Explain the use of water to prevent gum build up
inside blower.
[ ] Explain the warranty.
I acknowledge that above points were reviewed with
me at the time of delivery.
__________________________________________
Customer's Signature
___________________________________________
Date Delivered
