background image

SERVICE: 

SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors 
are explosive.
2.45   Extinguish all cigarettes, cigars, pipes, and all other sources of ignition.
2.46   Use only an approved gasoline container.
2.47   Never remove gas cap or add fuel with the engine running.
2.48   Allow engine to cool before refueling.
2.49   Never fuel the machine indoors.
2.50   Do not store machine near open flame or source of ignition, such as a water heater or furnace.
2.51   Remove gas powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such 

equipment with a portable container, rather than from a gasoline dispenser nozzle.

2.52   Never fill gasoline containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the 

ground away from your vehicle before filling.

2.53   Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until the fueling is complete. Do not 

use a nozzle lock-open device.

2.54   If fuel is spilled on clothing, change clothing immediately.
2.55   Never overfill fuel tank. Replace gas cap and tighten securely.

 Tank is full when level reaches bottom of fill tube.

GENERAL SERVICE

2.56   Never operate machine in a closed area where dangerous carbon monoxide fumes can collect.
2.57   Keep all nuts and bolts tight to be sure the equipment is in safe working condition. Never operate a poorly maintained machine.
2.58   Do not touch hot areas of the machine.
2.59   Never interfere with the intended function of a safety device or reduce the protection provided by a safety device. Check their 

proper operation regularly.

2.60   Keep the entire machine free of grass, leaves, or other debris build up. Clean up oil or fuel spillage and remove any fuel soaked 

debris. Failure to do so can affect the safety and functionality of the machine, as well as increase the danger of a fire due to 
contact with the hot surfaces of the machine.

2.61   Allow machine to cool before storing.
2.62   If you strike something with the mower, turn the mower and blades off, engage the parking brake, and inspect the machine for 

damage. Repair, if necessary, before resuming.

2.63   Never make any adjustments or repairs with the engine running.
2.64   Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, 

when necessary. 

2.65   Mower blades are sharp. Wrap the blade or wear gloves before servicing them. 
2.66   Check parking brake operation frequently. Adjust and service as required.
2.67   Maintain or replace safety and instruction labels, as necessary.
2.68   Do not attempt to mount a tire without the proper equipment and experience to perform the job.

PAGE  7

Содержание ZT 4800

















































Отзывы: