Bad Boy RECOIL iS CREW 2015, Руководство пользователя

Страница: 29 / 60

B
OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
21
Owner’s Manual
Truck Bed Latch Operation
Pull upward on the handle to release the truck bed latching mechanism, allow-
ing the front of the bed to be raised.
Seat Belt Operation
Seat belts must be worn by all occupants whenever vehicle is in motion.
Ensure seat belts are free from twists and latch securely.
Position shoulder belt across the top of the shoulder; do not place shoulder belt under the arm.
Keep belts snug and positioned low on hips. Loose fitting belts significantly reduce protection.
The vehicle is equipped with seat belts for the number of occupants it is designed to carry; do not
exceed the recommended number of occupants for the vehicle.
Seat belts are designed for one occupant per belt. Do not attempt to secure more than one person
in a seat belt.
Seat belts must be worn at all times by all occupants when vehicle is in motion.
To keep seat belts in proper working condition, do the following:
• Inspect the seat belt webbing and hardware periodically. Check for cuts, frays or loose parts. Replace components if
excessive wear or damage is noticed.
• Keep seat belts clean and dry. To clean, use mild soap and warm water. Do not use bleach, dye or abrasive cleaners
as this will weaken the belt webbing material.
• Do not insert any foreign objects into the retractor mechanism.
• Periodically check for smooth operation and replace if the mechanism is not operating properly.
To properly secure the seat belts:
1. Pull the metal tab on the seat belt across the body toward the appropriate buckle located near the center of the seat.
2. Insert tab into buckle. (A click will be heard when the tab is securely latched).
3. Position the lap belt as low as possible on the hips, not at the waist.
4. Adjust to ensure a snug fit by pulling the shoulder portion upward.
The retractor will lock the belt during sudden stops. It may also lock if occupant leans forward quickly. Slow, easy motions
allow the belt to travel freely.
To release the safety belt, press the buckle release button and allow the belt to retract. If the belt does not retract, check
for twisted straps.
Bed Latch Handle