Bad Boy GroundHog MAX, Руководство пользователя

Страница: 8 / 23

Assembly for GroundHog MAX
Figure 1 is completed (assembled at factory)
Slide part (H) onto axle assembly (I). Insert 5/8”
bolt (J) through part (H) and axle assembly (I).
Add 5/8” lock washer (K) and 5/8 inch nut (L)
and tighten.
Note: where H slides onto I (axle assembly)
the “play” here is intentional. This allows
“float” for uneven terrain.
5 Assembly
Slide male T assembly(M, Fig. 3) onto height
adjustment bar(H) as in Figure 3. Insert tractor
pin(O) and secure with a cotter pin(N).
In the next section will show different ways to
use these parts to make your GroundHog MAX
compatible with your ATV.
WARNING: We recommend that you initially
plow lighty (you have numerous up and down
adjustment holes). Observe your ATV hitch and
assembly. Then gradually you can get more
aggressive on your settings. You can determine
how your paticular ATV works best. Once deter-
mined, then your can set right each subsequent
time you use it.
WARNING: Use of this product could cause
damage to your ATV if not used properly. This
product will necessarilly put some strain on your
ATV. You should ensure that your ATV is in good
mechanical condition before using this product.
Bad Boy Mowers
is not responsible for any
damage to your ATV as a result of your use
of this product.
Figure 1
Figure 2
Figure 3