3
Contents
1. Assembly Instructions
2. Pre-Cooking Precautions
3. Lighting Instructions
4. Storage Instructions
5. Important Reminders
1. ASSEMBLY INSTRUCTIONS
You will need:
1. An adjustable wrench
2. A Phillips head screwdriver
1.
Remove all components from the box and individual packaging.
2.
Hose Guard Attachment:
a.
Align hose guard hole with guard support hole.
b.
Insert bolt through hose guard and guard support.
c.
Attach washer and nut.
d.
Tighten with wrench.
3.
Hose to Burner Attachment:
a.
If the air shutter is not already attached to the burner with screws, align the air
control disc over the end of the burner.
b.
Burner’s screws may need tightening; be careful not to over-tighten.
c.
Insert brass hose connector into burner.
d.
Turn hose connector clockwise with wrench until snug; be careful not to
over-tighten.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
DO NOT OPERATE THIS APPLIANCE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.
1. Test your propane tank for gas leaks.
a. Attach the hose and regulator to the propane tank.
b. Close the regulator control valve on the hose to shut off gas flow.
c. Open LP cylinder valve by 1/8 to 1/4 turn.
d. Apply a soapy, non-abrasive liquid to all regulator and tank connections.
e. If any bubbles appear, there is a gas leak.
DO NOT PROCEED WITH COOKING IF THERE IS A GAS LEAK
2. If you smell gas,
immediately
shut off the supply at the tank, hose and regulator.
a. Extinguish any and all open flames appropriately.
b.
If odor continues, avoid appliance and call local fire department.
3. Keep a BC or ABC fire extinguisher on hand at all times for emergencies.
2. PRE-COOKING PRECAUTIONS
