Need help? 1.800.762.1142
Do not return to place of purchase.
Recipes
BlueRhino.com/recipes
Replacement Parts
parts.BlueRhino.com /
1.800.762.1142
11
Installing LP Gas Tank
To operate, you will need one precision-filled standard grill LP gas
tank with external valve threads.
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
grill.
Insert and Secure LP Gas Tank
Loosen LP gas tank retainer bolt by turning counterclockwise.
Place precision-filled LP gas tank upright into hole in grill body so the tank valve is facing the
gas line connection.
Secure tank by turning LP gas tank retainer bolt clockwise until tight.
Connecting LP Gas Tank
1. Before connecting, be sure there is no debris caught
in the head of the LP gas tank, head of the regulator
valve or in the head of the burner or burner ports.
2. Connect regulator/hose assembly to tank by turning
knob clockwise until it stops.
Disconnecting LP Gas Tank
1. Before disconnecting, make sure the LP gas tank valve
is “CLOSED.”
2. Disconnect regulator/hose assembly from LP gas tank
by turning knob counterclockwise until it is loose.
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to
moving this grill.
3. Place the protective cap cover on the LP tank and
store the tank outdoors in a well ventilated area out of
direct sunlight.
Getting More Propane
Need a tank of gas? One option is to try propane exchange. It’s easy, fast,
safe, and available at tens of thousands of conveniently located retail
outlets nationwide, which are typically open nights and weekends. You
can purchase a fresh, precision-filled tank or exchange your empty for a
fresh, precision-filled tank. Another option is to have your tank refilled at a
refill station. Be sure to check the hours of operation for the refill station.
20 lb
9 Kg
17.9 in.
/ 45.5 cm
12.2 in. / 31 cm
Operating Instructions
Checking for Leaks
Burner Connections
1. Make sure the regulator valve and hose
connections are securely fastened to the burner
and the tank.
2. Visually check the connection between the
burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the
orifice.
W
WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion
which can cause death, serious bodily
injury or damage to property.
4. Please refer to diagram for proper installation
(Figures 1 and 2).
5. If the burner/venturi tubedoes not rest flush to the
orifice, as shown, please contact 1.800.762.1142
for assistance.
Tank/Gas Line Connection
1. Make 2-3 oz. of leak detection solution by mixing
one part liquid dishwashing soap with three parts
water.
2. Make sure control knobs are in the “ OFF”
position (Figure 3).
3. LP:
Connect LP gas tank per “Installing LP Gas
Tank” section.
NG:
Connect NG main line per “Installing Natural
Gas Line” section.
4. LP:
Turn LP gas tank valve to “OPEN.”
NG:
Turn “ON” natural gas main valve.
5. Spoon several drops of solution, or use a squirt
bottle, at all “X” locations (Figures 1, 2, 4a and
4b).
a. LP:
If any bubbles appear, turn LP gas tank
valve to “CLOSED,” reconnect and re-test.
NG:
If any bubbles appear, turn natural gas
main valve “OFF,” reconnect and re-test.
b. LP:
If you continue to see bubbles after several
attempts, turn LP gas tank valve to “CLOSED”
and disconnect LP gas tank, per “Disconnect LP
Gas Tank” section. Contact 1.800.762.1142 for
assistance.
NG:
If you continue to see bubbles after several
attempts, turn natural gas main valve to
“OFF.” Disconnect natural gas line and contact
1.800.762.1142 for assistance.
c. LP:
If no bubbles appear after one minute, turn
LP gas tank valve to “CLOSED,” wipe away
solution and proceed.
NG:
If no bubbles appear after one minute, turn
natural gas main valve to “OFF,” wipe away
solution and proceed.
Installing Natural Gas Line
Installation should be done by a qualified service person.
W
CAUTION: If young children are in the area, a locking valve should be
considered.
Connecting Natural Gas Line
1. Before connecting, be sure there is no debris caught in
the head of the natural gas line, head of the grill natural
gas line or in the head of the burner or burner ports.
2. Connect grill natural gas line to natural main gas line.
Disconnecting Natural Gas Line
1. Before disconnecting, make sure the natural gas main
line valve is “OFF.”
2. Disconnect grill natural gas line from natural gas main line.
X
X
Figure 1: Main Burners
XX
LP Gas
Connection
LP Gas
Valve with
Orifice
Burner
venturi pipe
Figure 2: Side Burner
XX
LP Gas
Connection
Burner
venturi
pipe
LP Gas
Valve with
Orifice
Valve
Soft Pipe
Connection
Figure 3
OFF
APAGADO
Figure 4a
X
X
X
X
X
Figure 4b
X
X
