11
SHED SIZE
Measurements to
centers of 4x4's.
4x4 runners are generally installed 12" (30,5 cm) from ends of fl oor frame and under any seams.
FINISH
Your fl oor frame is now level
.
Second, secure at ends with
one fastener.
First, secure at ends with
one fastener.
Fig. A
203-5/8"
(612,3 cm)
203-5/8"
(612,3 cm)
203-5/8"
(612,3 cm)
240"
(609,6 cm)
LEVEL AND SQUARE FLOOR FRAME
Before attaching fl oor decking, it is important to level and square the fl oor frame.
A level and square fl oor frame is required to correctly construct your shed.
After the frame is level and square, secure one side of frame to 4x4 runners using
one fastener at ends of each runner.
At the opposite end of the frame, secure the frame to 4x4 runners with one
fastener at the ends of each runner, ensuring that the frame remains square.
Fasten the frame to the 4x4 runners with (2) 3" screws at each connection
(Fig. A).
2
BEGIN
1
Use a level and ensure the frame is level before applying fl oor panels.
Check for frame squareness by measuring diagonally across the corners
(diagonal measurement D)
.
If the measurements are the same, the frame is square. Use the chart below to determine measurement D.
See page 10 for the preferred fl oor leveling method.
LEVELING & SQUARING THE FLOOR FRAME (Not Included)
• 3" (7,6 cm) screws angled into 4x4.
• (2) at each connnection.
12"
(30,5 cm)
12"
(30,5 cm)
12' x 12'
12' x 16'
12' x 20'
12' x 24'
279-7/8"
(710,9 cm)
322"
(817,9 cm)
NOTE:
12' x 12' fl oor shown as an example.
D
D
D
Содержание GAMBREL 12' x 12'
Страница 2: ...This page intentionally left blank...
Страница 15: ...13 This page intentionally left blank...
Страница 81: ...79 Please continue to the included booklet to complete your shed PART 2...