13
DOOR
48"
(121,9 cm)
3/4"
(1,9 cm)
96"
(243,8 cm)
6" (15,2 cm)
edges of panel
12" (30,5 cm)
inside panel
20-1/2"
(52,1 cm)
DOOR
PARTS REQUIRED:
x1
x55
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
Grid lines
UP
Flush
Flush
Flush
Flush
Flush at
opposite
corner
edge
Seams
(2)
Nails
(2)
Nails
FLOOR
FLOOR
3/4" (1,9 cm)
Attach the 48 x 96" (121,9 x 243,8 cm) panel with the rough side up
(painted-grid lines side) with the 48" (121,9 cm) edge and corner flush to the
floor frame
(Fig A)
. Secure panel with (2) 2" (5,1 cm) nails in the corners.
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until corner is flush to the floor frame
(Fig. B)
.
Secure panel with (2) 2" (5,1 cm) nails in the corners.
2
BEGIN
¸
1
1
3
4
Continue attaching the panel with 2" (5,1 cm) nails 6" (15,2 cm) apart on
edges, and 12" (30,5 cm) apart inside panel.
Ensure your floor frame is square by installing one panel and squaring frame.
Fig. A
Fig. B
Fig. C
Check the
floor
frame is square by measuring diagonally across the frame corners.
If the measurements are the same your
floor
frame is square. The measurement will be
approximately 151" (383 ,5 cm)
(Fig. C)
.
151"
(383,5 cm)
151"
(383,5 cm)
151"
(383,5 cm)
2" (5,1 cm)
NOTE THIS
MEASUREMENT
