9
FLOOR LEVELING OPTIONS
There are multiple ways to level your floor frame. Our recommended leveling method is shown below.
Leveling materials are not included in this kit.
PREFERRED METHOD - 4x4 TREATED RUNNERS
Measurements to
centers of 4x4's.
• 3" (7,6 cm) Screws
angled into 4x4.
• (2) at each point frame
•
and 4x4 touch.
12"
(30,5 cm)
12"
(30,5 cm)
• Level under 4x4 runners only.
• Locate leveling material 12" (30,5 cm) from ends of runners and no more than 48" (121,9 cm) apart.
• Asphalt shingles should be used between 4x4 runners and blocks or treated lumber.
Never use shingles in direct contact with ground.
• For best results and aiding in water drainage use gravel under each concrete block.
LEVELING METHODS
•
If you are building your shed on a concrete foundation see the following page.
CONCRETE
MATERIAL REQUIRED
x2
4" x 4" x 10' (8,9 x 8,9 x 304,8 cm)
Treated Lumber
Fasteners for Frame to 4"x 4".
(3" (7,6 cm) Screws shown as one option.) Minimum (24) 3" (7,6 cm) screws / exterior grade.
Use only wood treated for ground contact and fasteners approved for use with treated wood.
Always support frame seams.
Leveling higher than 16" (40,3 cm) not recommended.
LEVELING MATERIALS
Gravel
2x4 Treated Lumber
Solid Masonry Blocks in 1", 2", 4" or 8" thickness
Asphalt Shingles
8" Block
4" Block
Gravel
Gravel
4x4 Runner
Shingle
Shingle
Maximum between leveling
material locations.
48"
(121,9 cm)
12"
(30,5 cm)
12"
(30,5 cm)
2x4 Treated Lumber
2" Block
Level
Do not exceed
16" (40,3 cm).
