PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL
(FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE
CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.
INSERT THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
START HERE
(FIG.
1)
(FIG.
2)
SLIDE SUPPORT TUBE
(x4)
A100034
STEP 3
NOTE:
SLIDE ASSEMBLY
385
(x1)
SLIDE BED 10' DARK GREEN
034
(x4)
SLIDE SUPPORT TUBE
38
