IIIIm
m
m
mppppoooorrrrttttaaaannnntttt A
A
A
Asssssssseeeem
m
m
mb
bb
bllllyyyy N
N
N
Nooootttteeeessss
1) While assembling unit, take time before and after each phase to make sure structure is level.
If structure is not level, assembly will be difficult and improper assembly may result. Extra care
must be taken to insure the structure is square.
2) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
3) Pay close attention to make sure you are using the correct hardware in the correct phases. Using
incorrect hardware may result in improper assembly.
4) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
5) Read the steps of each phase thoroughly. The written steps may include important information not
shown in the illustrations.
B
B
B
Baaaassssiiiicccc S
S
S
Seeeettttuuuupppp D
D
D
Diiiim
m
m
meeeennnnssssiiiioooonnnnssss
Place the pergola swing on level ground, not less than 6 ft [2 m] from any structure or obstruction
suchas a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
8
'-
5
/3
2
"
[2
.4
8
M
]
6'-15/32"
[2.13m]
15/32"
[.14M]
1
'-
2
1
/6
4
"
[.
4
0
M
]
4'-29/32"
[1.49M]
WEIGHT LIMIT: 450 lbs.
