11
12. Tighten threaded knobs (L) found on tank tray (Figure.11) ) so that the LP
tank cannot move from side to side. Do not remove plastic cap from end of
threaded section.
Figure 9
13. Pour the lava rocks(not include) into the burner pan completely covering
the burner. See Figure 12.
BURNER PAN
IGNITION WELL
Figure 12
14. Remove the cardboard cover from the ignition well as shown in Figure 12.
Remove any lava rock or fire ice on top of ignition well.
Figure 13
CARDBOARD COVER
15. Open the tank valve. Apply a solution of soapy water to the tank-regulator
connection and to the valve-hose connection to check for leaks as shown in
Figure 14. If soap bubbles continue to form, the connection has a leak. If a leak
is found, close the tank valve and
tighten all connections.
NOTE: NEVER USE A FLAME TO CHECK FOR LEAKS.
Figure 14
Checking the tank-regulator for leaks
