S
T
E
P
13
S
T
E
P
14
S
T
E
P
15
Step 13: Locate the sunshade stem Part L, and the 6 sunshade splines Parts M. Slide each spline Part M into the ends of
the sunshade stem branches on Part L as shown in Box 26. Locate the sunshade canopy Part Q, and place it on the
ground so that the small pockets at each point of the canopy are facing up. Place the sunshade stem with inserted
splines on top of the canopy as in Box 27. Insert the ends of each spline into the small sewn pocket at each corner of the
canopy as shown in Box 28. Repeat with each spline until sunshade canopy is stretched onto each spline and the
sunshade is complete.
Box 26
Step 14: Unscrew the hand knob from the sunshade stem (Part
L). Insert the bottom of the sunshade stem into the sunshade
holder located on the top of the assembled frame as shown in
Box 29, and push down until the hole in the holder and in the
stem match up. Secure the sunshade to the frame by screwing
the hand knob into the aligned holes as shown in Box 30.
Box 29
Box 30
Step 15: This hanging lounger has two convenience accessories.
Part N is a removable hanging convenience pouch that can be
hung from the chair frame by looping the straps over the chair
frame and securing with the Velcro strap ends as in Box 31. Part
O is a drink holder. Simply loop the drink holder strap over the
chair armrest, and back through the strap so that it hangs from
the armrest as in Box 32.
Box 27
Box 28
Box 31
Box 32
