S
T
E
P
4
S
T
E
P
5
S
T
E
P
6
Step 4: Find Parts E. Identify the ends with the crimp over the hole as
shown in photo. Hold both Parts E with crimps facing each other and
proceed to Step 7.
Step 5: Locate Parts T (3 ¾” Bolt with 13mm washer) and insert through one of Parts E. Place Part W (Closed S-Hook) onto
the bolt Part T as shown in Box 8. Place the second and opposite Part E onto the bolt Part T as shown in Box 9. Place 13 mm
washer and 13mm lock nut onto end of Part T and tighten using open ended wrenches (Part AA) as shown in Box 10.
Box 8
Box 9
Box 10
Step 6: Locate Parts G. Place swedge end closest to bend of each Part G, and insert into both open ends of Part E as
shown in Box 11. Push down on lock-pin on each Part G as shown in Box 12, and slide Part G onto Part E until lock-pin is
fully engaged into lock-pin hole of Parts E as shown in Box 13.
Part E
Part G
Bend
Box 11
Box 12
Box 13
