Step 7: Locate Parts R (3 ¾” Bolt with 13mm washer) and insert through one of Parts E. Place Part U (Closed S-Hook) onto
the bolt Part R as shown in Box 13. Place the second and opposite Part E onto the bolt Part U as shown in Box 14. Place 13
mm washer and 13mm lock nut onto end of Part R and tighten using open ended wrenches (Part Z) as shown in Box 15.
Box 13
Box 14
Box 15
S
T
E
P
7
S
T
E
P
8
Step 8: Hang Part E assembly to the hanging hook of Part C using the threaded
connecting link (Part T). Threaded connecting link connects to Part E assembly
through Part U (Closed S-hook). Close the connecting link by lifting the collar onto
threads and turn until secure.
S
T
E
P
9
Step 9: Locate Parts G. Place swedge end closest to bend of each Part G, and insert into both open ends of Part E as
shown in Box 16. Push down on lock-pin on each Part G as shown in Box 17, and slide Part G onto Part E until lock-pin is
fully engaged into lock-pin hole of Parts E as shown in Box 18.
Part E
Part G
Bend
Box 16
Box 17
Box 18
