5
ASSEMBLY
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package contents list
and hardware as listed on page 4 of this manual. If any part is missing or damaged, do not attempt to assemble this
product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware!
Tools Required for Assembly (NOT included):
7/16” open-end wrench | Phi
l
lips
head
screwdriver with medium blade | Adjustable wrench
Leak Test Solution (see instructions on how to make solution.)
1
Attach
Wheel Assembly
to
Base
. Line up holes in
Wheel
Assembly
with corresponding holes
in
Base
and insert 2 -
Hardware Used:
2 - Medium Bolts
1
2
3
2
Attach the
Support Brackets
to the
Base
. Attach the 3 -
Support Brackets
loosely to the Base with 3 -
Medium Bolts
inserted through the holes in the bottom of the
Support
Brackets
and into the
Base
.
Hardware Used:
3 - Medium Bolts
3
Attach the
Post
to the
Support Brackets
. Once you have
tightened the bolts holding the
Support Brackets
to the
Base
,
align the holes in the bottom of the
Post
with the holes on the
tops of the
Support Brackets
and insert 6 -
Large Bolts
through
the hole in the
Post
and through the hole in the
Support Bracket
.
Affix 6 -
Small Flange Nuts
to the bottom of the
Large Bolts
.
Hand
-
tighten initially then tighten with a wrench when all
B
olts
have been inserted.
Hardware Used:
6 - Large Bolts
6 - Small Flange Nuts
Contact us for assistance:
Medium Bolts through holes. Finger-tighten bolts. Make sure
Wheel Assembly is parallel to Base, then fully tighten the Bolts.
NOTE: Sand box is pre-assembled to base. For best stability,
fill the sand box with sand.