Backfire HALO NEW, Руководство пользователя

Страница: 4 / 12

03
Hold the Power Button for 3 seconds to power ON/OFF the board.
*整机出厂时，默认遥控已和滑板配对设置完成
When both the remote and board are in the OFF state, hold the Power Button on both the
board and remote at the same time for 3 seconds to pair.
In the 4WD configuration, the rear controller (ESC1) should be paired before the front (ESC2).
Auto-Pairing
Searching
Select between KM and MILES using the Throttle
Wheel, and press the Power Button on the remote
to confirm your choice.
KM MILES
Unit Selection
Select 2WD/4WD
Hold the Power Button on
ESC1 for 3 seconds
Select the drivetrain setup on your
board using the throttle wheel.
Searching
ESC1
Searching
ESC2
4WD
Unit Selection
2WD
BELT
Unit Selection
HUB
Wheel Si z e
97
99
98 96
95
GEAR RATIO
2
.
5
2
.
7
2
.
6 2
.
4
2
.
3
Motor PP
6
8
7 5
4
Comple te
2WD ONLY REQUIRES THE PAIRING OF ONE ESC
Pairing Instructions
BACKFIRE 04
Select the number of Pole Pairs for your board's
motor configuration. [Between 2-26]
Pairing and configuration complete.
Select the wheel size of your board using
the throttle wheel.
[Between 90MM-200MM]
Select the gear ratio of your
drivetrain using the throttle wheel.
Hold the Power Button on
ESC2 for 3 seconds
ESC2 ESC1