Back to Basics COTTON CANDY MAKER, Инструкция по эксплуатации

Страница: 3 / 20

3
•
Do not use an outlet or extension cord if the plug fits loosely or if the outlet or
extension cord feels hot.
•
Avoid contact with moving parts.
•
Keep hands and utensils out of collection bowl while making cotton candy.
•
Use only cotton candy cones for collecting cotton candy.
•
For household use only.
SAVE THESE INSTRUCTIONS
B
EFORE
U
SING FOR THE
F
IRST
T
IME
Please check all packaging material carefully before discarding. Many
accessory parts are contained within the packaging material.
Wash bowl assembly (collection bowl, flossing rim, and connecting ring), measuring
scoop, and extractor head in warm, soapy water. Rinse thoroughly and dry. Ensure
that the extractor head is completely dry before adding sugar. Do not place the
heating base in water or any other liquid.
U
SING
Y
OUR
C
OTTON
C
ANDY
M
AKER
1. Assemble the collection bowl and flossing rim by aligning the holes in the
flossing rim to the pegs on the collection bowl. Place the connecting ring over
the flossing rim and press down until it clicks in place. Place the assembly on
the base and gently push down to “snap” in place.
2. Place appliance on dry, level, heat-resistant surface, away from any edge. Press
down on the base of the cotton candy maker to secure the suction feet. Place
extractor head onto the spinner shaft. Make sure that the pegs on the spinner
shaft are fully engaged in the slots of the extractor head.
Extractor Head
Flossing Rim
Connecting Ring
“ON/OFF” Switch
Suction Feet
Collection Bowl
Measuring Scoop
Heating Base
Center Well
Inside: Spinner
Shaft