Bacharach Fyrite Pro, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 64

Instruction 0024-9395 15
Fyrite Pro
3.5.7 Year Setup
The Year Setup Screen is labeled “YEAr”.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press
ENTER
until the Year Setup Screen is displayed.
2. Press the ▲ or ▼ button until the correct year is displayed.
3. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
3.5.8 Selecting Printer Protocol
The analyzer can be set up for either an HP or IrDA type printer.
1. Enter the Setup Mode per Section 3.5.1. If necessary, repeatedly
press
ENTER
until one of the following screens is displayed.
2. Press the ▲ or ▼ button to select the desired printer protocol.
3. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
3.5.9 Exiting the Setup Screen
Press the
I/O
button at any time to exit the Setup Mode and turn OFF the
analyzer. Note that the last displayed parameter is automatically saved in
memory.