Bacharach FYRITE CO2, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 40

Instruction 0011-9026 Page 6
7. Absorb sample gas into
FYRITE by inverting
until fl uid drains into top
reservoir (Fig. 7). Then
turn upright (Fig. 8) to
drain fl uid into bottom
reservoir. Repeat this
step once.
8. Hold FYRITE at 45°
angle (Fig. 9) momentari-
ly to allow fl uid droplets
to drain into the bottom
reservoir.
9. With FYRITE held
upright (Fig. 10), per-
mit fl uid in column to
stabilize a few seconds,
then immediately read %
carbon dioxide on scale at
the point corresponding to
top of the fl uid column.
CO
2
FYRITE OPERATION O
2
FYRITE OPERATION
(RED FLUID) (BLUE FLUID)
7. Absorb sample gas into
FYRITE by inverting
until fl uid drains into top
reservoir (Fig. 7). Then
turn upright (Fig. 8) to
drain fl uid into bottom
reservoir. Repeat this
step three (3) more times
(four complete inversions
total).
8. Hold FYRITE at 45°
angle (Fig. 9) momentari-
ly to allow fl uid droplets
to drain into the bottom
reservoir.
9. With FYRITE held
upright (Fig. 10), per-
mit fl uid in column to
stabilize a few seconds,
then immediately read
% oxygen on scale at the
point corresponding to top
of the fl uid column.
Figure 7
Figure 8
Figure 9
Figure 10