Bacharach 2800, Инструкция

Страница: 7 / 16

Instruction 19-9220
CO
2
Monitor 2800
2.0 OPERATION
2.1 Reading Mode
When the instrument is switched on, there will be a 20 second (approxi-
mately) warm up time before the CO
2
level present in the atmosphere
surrounding the user is displayed. The ON/OFF button should be pressed
quickly when switching the unit on and held down for approximately 2
seconds when switching the unit off.
CO2 PPM CO2
MONITOR 300
When­ the un­it has been­ turn­ed on­, a “con­fiden­ce beep­” will soun­d for
0.25 seconds every 30 seconds. This should NOT be interpreted as an
alarm condition. The unit has two preset alarm levels which are normal-
ly set to indicate the presence of Carbon Dioxide in concentrations above
5,000 ppm or 10,000 ppm (factory preset levels). The levels can be factory
set at customer sp­ecified levels, or can­ be reset usin­g the BACH-COM
Software (See Section 4.1).
When the CO
2
level rises above the low alarm level:
• The disp­lay will show the con­cen­tration­ an­d flash on­ce p­er secon­d.
• The Alarm LEDs will flash on­ce p­er secon­d.
• The beeper will sound intermittently once per second.
When the CO
2
level rises above the high alarm level:
• The disp­lay will show the con­cen­tration­ an­d flash on­ce p­er secon­d.
• The Alarm LEDs will be lit continuously.
• The beeper will sound continuously.
3