Nexus
®
Modular Hybrid Cooler iPilot
®
Control System Quick Start Guide
–
Instructions
Page | 6
iPilot® Control System Quick Start with Recommended Settings
1.
Verify that the supply power is connected to the iPilot® control system.
2.
Turn on all circuit breakers inside the iPilot® control system.
3.
Close the iPilot
®
control system panel and ensure that all the locks have been fully engaged and secured by rotating them 90° with a
flathead screwdriver or coin.
4.
Turn on the main power supply to the unit and ensure that main disconnect switch on the iPilot® control system is turned ON.
5.
On the iPilot
®
control system
keypad press
Prg
. Press enter (
←
) 4 times to enter the default user password
of “0000”.
6.
From the Main Menu scroll up (
↑
) or down
(
↓
)
and highlight
“
D. Clock Menu
”
, then press enter (
←
). While in the Clock Menu, press
enter (
←
) to begin making changes. Use the up (
↑
)/down
(
↓
)
arrows to set the date, time, and time zone, then press enter (
←
) to
accept changes.
