BAC ICE CHILLER TSU-237M, Инструкция по эксплуатации и техническому обслуживанию

Страница: 17 / 32

Rotate the black knob to change 'No' to 'Yes' and press to confirm your choice. When choosing 'No', you return to
the previous menu. When pressing 'Yes' you access the screen below:
The sample counter moves from 1 to 16 and then the next screen is shown.
Rotate the black knob to dial 7 and press to confirm the zero setting. The display shows 'Zero Level succesfully
changed' to confirm the setting. If the black button is pressed without dialing 7, the zero level is not stored.
In case sensor position is no good to allow a full range measurement, an alarm message is shown on the
display. Modify sensor position and start over.
Set Update Period: This allows you to determin how often a measurement will be updated by the
controller. Typically 120 seconds is set. During commissioning or testing periods the sample time can be reduced
to obtain quicker response.
Rotate the black button to dial different value. Press button to confirm or leave the menu.
Show Range: This allows you to see the range which corresponds to 100% ice level rise. For TSU-M models the
range is typically 117mm, for TSU-ML models this is typically 92mm. This meny is only to view the range. Setting
the range is another menu (Set Range).
Press button to confirm or leave the menu.
W W W . B A L T I M O R E A I R C O I L . E U
17
3 Operating Instructions
3 Operating Instructions