![background image](http://html1.mh-extra.com/html/bac/fxv/fxv_rigging-and-assembly-instructions_3287910016.webp)
WWW.BALTIMOREAIRCOIL.COM
14
PCD Hood Assembly (Optional)
The FXV’s innovative design results in a low heat loss when the unit is idle. When
additional heat loss reduction is desired, coil air intake hoods with factory mounted PCDs
with stainless steel linkages and damper actuators can be provided. The motor actuators
are easily accessible. The addition of optional factory mounted insulation to the hood and
casing can further reduce the heat loss by minimizing losses due to conduction.
1. Lower the PCD hood into place with the access door on the louver face of the unit.
2. Apply foam tape (BAC part # 270567) to the bottom edge of the PCD hood. Attach
the PCD hood along the front and back using hardware provided.
Lifting Ear (4)
PCD Access Door
PCD Hood Front
PCD Hood Back
Louver Face
Figure 21.
PCD Hood Assembly (FXV-0806 Shown)