10
OPERATION
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
9
ASSEMBLY
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
TO USE SAFETY BELT
WARNING:
The highchair should be used only
by children capable of sitting upright
unassisted and at least 6 months of
age.
WARNING:
Prevent serious
injury or death from falls or sliding
out. Always use the restraint system.
The child should be secured in the
high chair at all times by the 5-point
restraining system, either in the
reclining, semi-reclining or upright
position.
10)
• The shoulder straps of the 5-point harness have 2
attachment positions. Select the position that places
the shoulder strap level with, or below, the top of the
child’s shoulders (Fig. 10a).
• Carefully place the child in the seat and position the
safety harness around the child’s waist and over the
shoulders. Place the crotch strap between the child’s
legs. Insert the male end of each shoulder / waist belt
into the buckle on the crotch strap. Tighten the harness
to be snug around the child’s waist and over the child’s
shoulders (Fig. 10b).
TO RELEASE SAFETY BELT
11)
• Push Button on Center Clasp, the two Harness
Buckles will pop free (Fig. 11).
RECLINE SEAT
12)
• Squeeze recline lever on back of the seat and
adjust to the preferred recline or upright position
(Fig. 12).
Use caution not to trap arms, hands and fingers
when adjusting recline positions.
Fig. 12
Fig. 11
Fig. 10b
Fig. 10a
Center Clasp
TO ADJUST SEAT HEIGHT
WARNING:
Do not
adjust seat height with child in
seat. Adjust seat height before
placing your child in the high
chair.
WARNING:
Always check that the height
adjustment bracket is level
and both left and right sides
locked before placing child in
the high chair.
WARNING:
Never
rest the height adjustment
bracket on the locking pins.
13)
• Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment bracket (Fig. 13a) and
adjust to the ideal position (Fig. 13b).
DO NOT
adjust with child in the seat.
ATTENTION:
Make sure the Height
Brackets lock on the lowest position.
DO NOT
rest Height Adjustment
Brackets on the Locking Pins (Fig. 13c).
Fig. 13a
Fig. 13b
Fig. 13c
Release Handle
Highest Position
Lowest Position
Locking Pin