17
18
MAINTENANCE
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés
.
MAINTENANCE
FENDER
If adjustment or replacement is necessary:
20)
• To remove the front fender: follow
(Fig. 20a). Use a phillips screwdriver to
remove the 2 screws under the frame.
(Fig. 20b).
21)
• Remove footrest to access nut. You
can use a standard crescent wrench to
tighten the nut (Fig. 21).
DO NOT OVER TIGHTEN
this can
cause damage to the wheel housing.
22)
• To reinstall fender: Insert the 2 screws
through the front frame assembly into the
front fender’s plastic tubes. Tighten the
screws only until snug (Fig. 20b).
DO NOT OVER TIGHTEN.
Fig. 21
Fig. 20a
Fig. 20b
Screws
REATTATCHING
FRONT WHEEL
23)
• Slide the front wheel onto the front fork
(Fig. 23).
24)
• Slide the retainer plate onto the front
wheel. Be sure that the raised lip is
pointing toward the fork and insert it
into the slot on the fork. The tab on the
retainer plate must be lined up with the
slot before tightening the wheel
(Fig. 24).
25)
• With the wheel in position, tighten the
axel nuts and tighten with standard
crescent, box, or open end wrench. You
should feel significant resistance and
the wheel should be held tightly in place
(Fig. 25).
SEAT PAD
• To clean the seat pad, use only mild
household soap or detergent and warm
water on a sponge or clean cloth.
OTHER
• Check your stroller for loose screws,
worn parts, torn material or stitching on
a regular basis. Replace or repair parts
as needed.
Fig. 23
Fig. 24
Retainer Plate
Axel Nut
Axel and Hub
Front Fork
Slot
Fig. 25
