57
58
8.0
Booster Car Seat (Without Built-in
Harness) Installation and Use
8.0
Booster Car Seat (Without Built-in
Harness) Installation and Use
WARNING!
DEATH or SERIOUS INJURY can occur:
• If child will not keep vehicle shoulder belt properly positioned
on shoulder, DO NOT use this Booster Car Seat. Use a
different child restraint system.
• Do not allow child to slide down in High-back Booster Car
Seat which could position vehicle lap belt across child’s
abdomen and shoulder belt over neck or face.
• Do not use Body Insert in Booster use mode.
8.1 High-back Booster Car Seat (
WITHOUT
Built-in
Harness) Installation and Use
WARNING!
• Child must be at least 4 years old and weigh at least 40 lbs.
(18.1 kg) to use the High-back Booster Car Seat.
• Do not route vehicle shoulder belt through Toddler Shoulder
Belt Guide when using Booster use mode.
• Use Toddler Car Seat
WITH
Harness as long as possible
before changing to High-back Booster mode.
• Shoulder belt must slide freely in the inner slot of Booster
Shoulder Belt Guide in Head Support.
NOTE: LATCH or Top Tether may be used to secure the High-back
Booster Car Seat in position. Securing the High-back Booster
Car Seat in the vehicle can make it easier for a child to get in
and out of the High-back Booster Car Seat (see, Section 7.3.1).
To secure car seat and your child:
1. Assemble the Back Support (see “Assembly and Removal of Back
Support” section).
2. Remove harness system (see “Harness Removal and Assembly”
section).
3. Tuck harness adjuster belt up under front of seat base.
4. Place the car seat on the vehicle seat in a
seating location equiped with a vehicle
Lap/Shoulder belt and centered between
the Lap/Shoulder belt anchorages (see
“Selecting a Vehicle Seating Locations” section).
WARNING!
• Do not place the High-back Booster
Car Seat in a seating position that
has only a vehicle lap belt.
