BABYTREND CS79C59A, Руководство пользователя

Страница: 18 / 34

33
34
5.0
Features
5.0
Features
Fig. 33-4
Fig. 34-1
Fig. 33-3
Fig. 33-2
Fig. 33-1
1d. To thread the stamping back into
the strap slip the strap through the
center by reversing steps 1b and 1c.
2. Insert the sewn Anchor stamping
and the woven positioner stamping
thru the inner most slot, slot #1
(Fig. 33-1) - (Fig. 33-2).
3. View from underside. Pull slack as
needed (Fig. 33-3)
4. Thread the sewn anchor stamping
from the bottom of shell thru the
middle slot for storage. This storage
is so that the sewn anchor will not
interfere with function or cause a
mis-latch with shell and base when
the “low birth weight” positioner
stamping is used (Fig. 33-4).
Seat Cut-Away
Buckle
Anchor Bracket
Belt Shortening Clip
5. To shorten the buckle webbing length, thread
the anchor bracket through the slot forward of
the use position. Confirm the Anchor Bracket
is completely through the forward slot. Pull on
webbing from the bottom side of the safety
seat to confirm the Anchor Bracket is secured
in place (Fig. 34-1).
Seat Cut-Away
Buckle
Anchor Bracket
3 2 1