13
12
5.7 Infrared Night Vision (Automatic)
• The infrared night vision function allows the camera to pick up images of your baby or the
monitored area in dark or low light conditions.
• In this mode, only black and white colors will be displayed on the Parent Unit screen.
• When the camera is in night vision mode, the icon will be displayed on top of the LCD screen.
• The optimum image is obtained up to 6 feet distance between baby unit and object.
6. Menu Operation
6.1 Pairing the Baby Unit with Parent Unit
Baby Unit is paired to the Parent Unit when supplied. There is no need to pair the units again unless
the Baby Unit loses its link with the Parent Unit. To renew the pairing of your units or pair a new/
additional Baby Unit, follow the procedure below:
Note:
Before you begin pairing, be sure to have the Baby and Parent Units side by side a turned on.
• Press the MENU/EXIT button
(8)
and the menu screen will be displayed on the Parent Unit.
• Press the LEFT button
(11)
or RIGHT button
(12)
until the PAIR icon is highlighted in redand then press
OK
(6)
to confirm.
• Press the LEFT button
(11)
or RIGHT button
(12)
to select the desired camera to pair.
• Press OK button
(6)
to start the pairing.
• While the camera icon & LED are flashing, press and hold the PAIR button
(26)
in the back of Baby
Unit.
• Once paired, an image from the paired camera will display on the screen.
• If unsuccessful, please repeat above steps.
• Press the MENU/EXIT button
(8)
to Exit.
Note:
If there is more than one camera to be paired, repeat the above steps for each camera
individually.
6.2 ECO Setting
This mode allows you to control the sound level from your baby’s room to automatically activate the
sound and video transmission on your Parent Unit. When using the ECO function, the sound and video
transmission will stop (standby mode) if the Baby Unit does not register any sound within 30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the
set sensitivity level, it will automatically start transmitting the signal (sound and video) to the Parent
Unit and the LCD screen will turn on.
Note:
ECO default setting is OFF in the supplied product.
To change the ECO level, please follow the following instructions:
• Press the MENU/EXIT button
(8)
and the menu will be displayed on the Parent Unit.
• Press the LEFT button
(11)
or RIGHT button
(12)
until the ECO icon is highlighted in red and then press
OK
(6)
to confirm.
• Press the LEFT button
(11)
or RIGHT button
(12)
to select the desired level (HIGH, MID, LOW, OFF).
• Press OK
(6)
to confirm.
• Press the MENU/Exit button
(8)
to Exit.
Note:
ECO-LOW Low sensitivity level - higher sound level is required to reactivate the transmission
ECO-MID Medium sensitivity level - medium sound level is required to reactivate the transmission
ECO-HIGH High sensitivity level - low sound level is required to reactivate the transmission
OFF Constant transmission – no standby mode.
Note:
When ECO function is on, a ECO indicator will be displayed on top of the LCD screen.
Note:
To view a video signal on your parent unit when ECO function is on, briefly press the power key.
6.3 Temperature Unit Setting
• Press the MENU/EXIT button
(8)
and the menu screen will be displayed on the Parent Unit.
• Press the LEFT button
(11)
or RIGHT button
(12)
until the Temperature icon is highlighted in red and
then press OK
(6)
to confirm.
• Press the LEFT button
(11)
or RIGHT button
(12)
to select between C˚ or F˚ .
• Press OK
(6)
to confirm.
• Press the MENU/EXIT button
(8)
to Exit.
Note 1:
Temperature indicator will be displayed on top of the LCD screen.
Note 2:
The temperature default setting is F˚ (Fahrenheit ).
Note 3:
The monitor features a built-in automatic temperature alarm. The monitor will alert (visual
indication) when the temperature in baby’s room is too high (90°F and higher) or too low (55°F and
lower). This feature cannot be adjusted.
Содержание V24R-1
Страница 42: ......
