2 |
P a g e
IMPORTANT: READ CAREFULLY AND
RETAIN FOR FUTURE REFERENCE
INSTRUCTIONS FOR SAFE USE
The correct use and maintenance of your cot/bed will ensure it gives long and trouble-free use. Please ensure
everyone use your cot/bed know how to use it. The safety of your child is your responsibility.
• WARNING: Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas
fires, etc. in the near vicinity of the cot.
• WARNING: Do not use the cot/bed if any part is broken, torn or missing and use only spare parts approved
by Babymore.
• WARNING: Do not leave anything in the cot or place the cot close to another product which could provide a
foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
• WARNING: Do not use more than one mattress in the cot.
• WARNING: When converted to a child’s bed, do not place this bed near heat sources, windows and other
furniture.
• The lowest base position is the safest. Once your child is old enough to sit up unaided the base should be
used in the lowest position only.
• If your leave the child unattended in the cot, always make sure that the movable side is closed
• The thickness of the mattress chosen shall be such that the internal height (surface of the mattress to the
upper edge of the cot frame) is at least 500mm in the lowest position of the bed base and at least 200mm in
the highest position of the bed base.
• The line engraved on the cot end indicates the maximum thickness of a mattress that can be used with this
cot when the bed base is in the top position.
•
We
recommend
the
use
of
a
mattress
minimum
size
of
70cm
by
140cm
for
this
cot.
With a thickness not
exceeding 10cm.
The
length
and
width
of
mattress
shall
be
such
that
the
gap
between
the
mattress
and
the
sides
and
ends
does
not
exceed
30mm.
• Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed
too close to other furniture or windows, and should be placed either tight to any wall or have a gap of
300mm between the wall and the side of the bed.
• Please ensure that all assembly fittings always be tightened properly before use. And fittings should be
checked regularly and tightened as necessary.
• The cot is only ready for use, when the locking mechanism(s) are engaged, check the mechanism(s) is fully
engaged before use.
• Your cot/bed may be cleaned with a damp cloth. Never use bleach or harsh abrasives.
• To prevent injury from falls, once the child is able to climb out of the cot, the cot should no longer be used
for that child.
• This
cot
bed
is
intended
for
children
aged
from
birth
to
4
years
approximately.
•
The cot conforms to EN 716-1/2:2008 + A1:2013. When converted to bed, it conforms to BS 8509:2008 +
A1:2011.
