41
YOO CARE •
Instruções de uso
CONEXÃO EMISSOR AO RECEPTOR
Este processo permite conectar o receptor com o
emissor de maneira que eles se comuniquem sem
outros aparelhos (mesmo Babyphones de modelo
idêntico) não possam interferir com você ou receber
o vosso sinal.
O emissor e o receptor já estão pareados por uma
senha pré-configurada de fábrica. Em todo caso, nós
recomendamos de configurar a conexão novamente
em caso de interferência:
1.
Pressione o botão de inicialização
(20)
do receptor,
durante 2seg para ligá-lo. Enquanto o incone do
menu
(14)
estiver ligado ( se ele não liga pressione
brevemente sobre o botão inicialização
(20)
, toque-o
para fazer com que apareça o menu principal sobre
a tela
(16)
.Utilize as teclas alto/baixo
(12) (13)
para
selecionar a função « emparelhamento », pressione
brevemente sobre o botão de inicialização
(20)
para
confirmar a vossa seleção.
2.
A tela
(16)
exibirá o menu « Seleção do aparelho » :
3.
Utilize as teclas alto/baixo
(12) (13)
para selecionar
« Bébé », pressione brevemente o botão de
inicialização
(20)
para confirmar.
Agora Utilize as teclas alto/baixo
(12)(13)
para
designar um número para poder conectar o emissor,
pressione brevemente sobre o botão de inicialização
(20)
para confirmar.
4.
Utilize as teclas alto/baixo
(12)(13)
para selecionar
« Conexão », pressione brevemente sobre o botão
de inicialização
(20)
para confirmar. O icone conexão
(11)
começará a piscar rapidamente, durante 15
segundos.
5.
Pressione sem soltar o botão de inicialização
(1)
do
emissor ate que o icone funcionamento/bateria fraca
(2)
em verde fixo pisca em verde. Solte o botão.
6.
Se a conexão for feita corretamente, a tela
(16)
exibirá
a imagem capturada pela camera
(3)
e as letras ao
lado de « conexão » e do icone funcionamento/
bateria fraca
(2)
ficará fixa.
NOTA : A etapa 5 deve ser feita enquanto o icone
de conexão (11) pisca rapidamente para que a
conexão seja bem sucedida.
7.
O aparelho está pronto para funcionar.
8.
Se a conexão falhar (a imagem na tela
(16)
não
mexe e não segue a imagem capturada pela lente
da camera
(3)
), refaça as etapas 1 a 5.
9.
Para desconectar um emissor, siga as etapas 1
e 2 descritas aqui acima. Na etapa 3, selecione o
número do emissor para desconectar e continue até
a etapa 4. Não efetue a etapa 5, espere até que a
luz verde do icone da conexão
(11)
pare de piscar
e se estabilize. Pressione longamente o botão de
inicialização
(20)
para desligar o receptor. O emissor
escolhido é desconectado.
FONCTIONNEMENT
1.
Coloque o emissor aproximadamente 1 metro da
cama do bebe, orientando a lente da camera
(3)
e o
microfone
(5)
em direção ao bebe.
2.
Ligue o emissor pressionando longamente o botão
de inicialização
(1)
durante 2 segundos até que a
luz do icone funcionamento/ bateria fraca
(2)
fique
verde, solte o botão de inicialização
(1)
. Se as pilhas
estiverem fracas o icone
(2)
ficará vermelho. Troque
as pilhas ou utilize o adaptador 5V fornecido.
3.
Agora ligue o receptor, pressionado longamente o
botão de inicialização
(20)
durante 2 segundos até
que a luz do icone funcionamento/bateria fraca
(10)
fique verde. Se este icone começa a piscar verde, é
que a bateria está fraca e precisa ser recarregada
com o adaptador setor 5V.
4.
A imagem capturada pela lente da camera
(3)
deverá aparecer na tela
(16)
, enquanto que o som
seja capturado pelo microfone
(5)
deverá ser ouvido
no alto-falante
(17)
. Se a tela exibe a mensagem
« sem sinal ou fora de alcance » esta significa que
os aparelhos não estão corretamente conectados
(ver o parágrafo CONEXÃO)
Ajuste o volume do alto-falante
(17)
para obter um
nivel de audição suficiente, utilizando as teclas alto/
baixo
(12)
(13)
. As barras exibirão na tela.
Para os pais que querem guardar um ambiente
silencioso, pressione a tecla « mudo » do alto-falante
(15)
. O alto falante será colocado em mudo e um
icone « mudo» aparecerá também na tela
(16)
.
Para reestabelecer o som do alto-falante, pressione
novamente o icone
(15)
, o volume voltará no nível
incial.