www.babylove.com.au
www.babylove.com.au
A.
NOTE: Clean grip pads regularly, using warm water
NOTE: For easier assembly, turn the frame upside down.
with a household soap or mild detergent to maintain
stopping performance.
A.
Turn walker right side up.
B.
Position one hand on either corner of the tray, while
holding the base down with the other hand.
C.
ASSEMBLY - WHEELS & GRIP PADS
Wheels - Insert the end of the wheel posts all the way
into the holes located at each corner of the walker base
using moderate forc
e. Insert all 4 wheels.
B.
Grip Pads - Insert the 8 Grip pads into the holes located
around the base. Push all the way in.
OPEN/RAISE WALKER SEAT
There are three height adjusting positions. Lift the tray
slowly while holding down the base until you hear the
tray lock into the first/lowest position. (If raised past
the first/lowest position then see step 6B/C to lower it.)
B.
A1.
C.
04
09
A2.
B1.
B2.
