17
Forward Facing - For Child Use
HOW TO INSTALL
HOW TO INSTALL
Fit the attachment clip to the anchor fitting. Make sure
to remove as many twists as possible from the upper
anchorage strap.
THIS TETHER STRAP MUST
ALWAYS BE FITTED WHEN THE CHILD RESTRAINT IS
Tighten Adjustable Upper Anchorage Strap by pulling
adjustment strap to remove slack. Do not over-tighten
Fully lengthen seat belt. Insert seat belt into child use
seat belt path, ensuring that the seat belt is not routed
between the harness and the back of the restraint, and
that the lap part of the seat belt is below the hooks.
G
Engage seat belt buckle and tongue, ensure to remove
all slack from lap part of seat belt by pulling sash belt.
Adjust the seat belt to hold the restraint firmly against
the vehicle seat. For inertia/retractable seat belts,
allow excess belt to feed back into retractor.
I
J
Fold up excess strap and use storage strap to neatly
store away from child's reach.
Engage Buckle
Pull to
tighten
Some vehicle seats have more rearward slope than
others. If the angle of the seat causes the base of the
child restraint to lift off the vehicle seat, use a firm
packing under the base of the child restraint, or at the
back of the restraint (as shown below).
Packing can be a firmly rolled up towel or nappy.
Rolled up towel
at the back
Rolled up towel
under the base
H
Anchor fitting
Attachment
Clip
8 to 18kg
8 to 18kg
8 to 18kg
F
Feed
through
seat belt
path
