BaBylissPro Volare X2 FX811U, Руководство пользователя

Страница: 8 / 16

AC OPERATION
You can use your clipper even when the battery capacity is low.
1. Make sure the power switch is off before connecting the adapter.
2. Connect the AC adapter in the same way as for charging. The
red charging light will come on.
3. Move the power switch to the ON position. The red charging
light will stay on for a second and then the unit will start.
4. If the clipper does not operate, charge the clipper for approxi‑
mately 1 minute.
USING THE CLIPPER
Slide the taper control up or down to adjust the
moving blade to the desired height. The blade is
adjustable in four (4) stages from 0.8mm to 2.0mm,
in 0.4mm steps without attachments. The actual
cut length may be longer than the set length.
Using the Comb Attachments
1. Select the desired comb attachment.
Trimming height is indicated on the outside
and sides of the attachments.
2. Set the taper control to 0.8mm and
then mount the attachment to
the clipper.
3. To attach the comb, do not press
on the tab. You must press over
the number as shown. The tab is
only for comb removal.
8
Press here to attach.
Push up
here
to remove.