•
Please note the styler must be positioned into the hair with the open
part of the curl chamber facing towards the head. (Diagram B).
•
Position the styler where you want the curl to start. The hair section
must be held straight, and placed neatly through the centre of the
styler. (Diagram C & D).
•
Once the hair is in place, let go of the hair section and close the
handle to allow the hair to be automatically taken into the curl
chamber. (Diagram E).
CURL DIRECTION CONTROL (Right/Left/Auto)
Use the Curl Direction Control to create either a uniform or natural
finish.
•
When styling the left side of the hair, slide the curl direction switch to
the left position
.
•
When styling the right side of the hair, slide the curl direction switch
to the right position
. This ensures that the curl sits towards the
face on both sides of the head and will give a more uniform style.
•
For a more natural look, select the auto setting
. This will alternate
the direction after each curl.
INSTRUCTIONS FOR USE
• Plug the styler into a suitable mains socket.
•
Chose your desired curl by pressing the curl mode button until the
light is illuminated under your chosen curl type.
•
Press the heat setting button until your required temperature is
selected (230˚C, 200˚C, 180˚C).
NOTE:
Always start with a lower temperature setting and increase
gradually if required.
•
The styler is ready for use when the chosen temperature light has
stopped flashing.
•
Select the curl direction by sliding the control to position
,
or
.
•
Ensure hair is clean, dry and combed through.
•
Separate a section of hair that is no bigger than 3cm (Diagram A).
NOTE:
When creating defined and loose curls take sections of hair
that are no bigger than 3cm wide. When creating tight curls, the
smaller the section the tighter the curl. When working with naturally
curly or longer length hair, we advise you to use even smaller
sections.
A
B
D
C
Содержание Perfect Curl MKII
Страница 9: ...IB 17 461 ...
