BaBylissPro BARBERSONIC BDISBOXE, Руководство пользователя

Страница: 7 / 104

7
the lid to immerse them in the
disinfectant solution.
Note: Be sure to close/open the
lid gently to prevent any overflow.
7. To start the automatic clea-
ning cycle (1 minute of vibrations
+ 10 minutes of LED light), turn the
switch to “AUTOMATIC CYCLE
”,
then shut the lid; the cleaning cycle
will start automatically. When the
cleaning cycle is complete, the light
will go out, indicating the you can
remove the items from the disinfec-
tant solution.
To start the cleaning cycle ma-
nually (vibrations and continuous
LED light), place the switch in the “I”
position and keep to the 10-minute
soaking time.
Fill line Fill line
Caution: When the manual clea-
ning cycle is set to the “I” position, it
is important to note that the device
will not turn off automatically. Make
sure, then, to stop the soaking time
after the recommended 10 minutes
have elapsed.
I – MANUAL CYCLE ACTIVE
0 - OFF
- AUTOMATIC CYCLE ACTIVE
8. Note: All the baskets can be
removed. To avoid risk of da-
mage, do not leave plastic
items in the disinfectant so-
lution for longer than 10 mi-
nutes. Follow the disinfectant
manufacturer’s instructions to
prevent damage.
After cleaning/disinfecting the
blades, it is recommended that you
rinse and dry them thoroughly. It
is crucial to lubricate them every
time before using them because the
alcohol in the solution eliminates all
existing lubricants.