BaBylissPro B787DBR Series Скачать руководство пользователя страница 3

OPERATING INSTRUCTIONS

1.    Before using the trimmer for the first time, charge continuously for 3 

hours. Maximum battery capacity will only be reached after 3 charging and 
discharging cycles.

2.    Make sure the switch on the trimmer is in the "0" position.
3.    Apply a drop of the provided lubricating oil across the blades; wipe off any excess 

oil with a dry cloth.

4.    Connect the charging jack into the receptacle on the bottom of the trimmer. Plug 

the adapter into any electrical outlet (at the voltage listed on the label affixed to 
the adapter). The charging indicator will light up to indicate that the charging has 
begun. Charging is complete after 3 hours. User will see LED light has stopped 
blinking and is now steady lit. 

5.     The adapter may become warm while charging. This is normal.
6.    Preserving the batteries: In order to maintain the optimum capacity of the 

rechargeable batteries, the trimmer should be recharged for 3 hours approximately 
every 6 months. 

7.   Slide the switch to "I" position.
8.   Make sure the switch is in the "0" position when the trimmer is not operating.
9.    Remove hair trimmings and debris from the blades using the provided cleaning 

brush. Wipe the housing clean with a dry cloth.

10.  Apply a few drops of lubricating oil to the blades, and wipe off any excess oil with a 

dry cloth. This last procedure is important for the proper maintenance of the blades.

11.  If the charging light starts to flash rapidly (more than 4 flashes per second) then 

the appliance is faulty. If this happens then please stop charging and remove the 
adapter from the mains and contact an authorized Service Center.

FOR DIRECT PLUG-IN OPERATION

Make sure trimmer is off. Connect charging jack into the receptacle at the end of 
trimmer and plug the adapter into power outlet. 

ON/OFF SWITCH

To operate, simply slide switch to "I" position. To stop operation, set to the "0" position.

VERY IMPORTANT: Blades must be cleaned and oiled on a regular basis for 
proper functioning. Failure to regularly clean and oil the blades will void the 
warranty.

B787DBR & FX787DBR Series IB-19_173B.indd   5-6

B787DBR & FX787DBR Series IB-19_173B.indd   5-6

2021/1/20   2:23 PM

2021/1/20   2:23 PM

Содержание B787DBR Series














Отзывы: