•
Release the handles fully and smoothly pull the appliance away from
the head to reveal the chosen wave.
• To allow the wave to set, do not comb or brush the hair until it cools.
• Repeat around the head until you have the amount of waves desired.
• After use, switch off and unplug the appliance.
Creating Smooth Styles
•
Ensure the hair is clean, dry and free of dry shampoo, hairspray,
mousse, spray wax, styling dust and all other styling products.
•
Comb through to remove any tangles and divide the hair into sections,
no bigger than 2cm wide.
•
To turn the appliance on, slide the switch to the heat setting suitable
for your hair type (See Heat Settings).
IMPORTANT!
Always allow the appliance to heat up fully before use.
The LED light will flash until the temperature setting has been reached.
•
Select the smooth setting by sliding the switch to smooth mode (See
Wave or Smooth Settings).
•
Always insert the hair into the appliance with the plate part facing
towards the head. Place a section of hair between the straightening
plates, close to the roots.
