INSTRUCTIONS FOR USE
Creating Waves
• Ensure the hair is clean, dry and free of dry shampoo, hairspray,
mousse, spray wax, styling dust and all other styling products.
• Comb through to remove any tangles and divide the hair into sections,
no bigger than 3cm wide.
• To turn the appliance on, slide the switch to the heat setting suitable
for your hair type (See Heat Settings).
IMPORTANT!
Always allow the appliance to heat up fully before use.
The LED light will flash until the temperature setting has been reached.
• Select the wave setting by sliding the switch to wave mode (See
Wave or Smooth Settings).
• Wave direction can be selected by sliding the switch to desired
direction (See Wave Direction Settings).
• Always insert the hair into the appliance with the open part of the
ceramic chamber facing towards the head. For longer length hair,
insert the hair into the appliance further down the section to ensure
the hair is drawn into the ceramic chamber efficiently.
•
Caution!
If the appliance is used incorrectly, in certain instances
a slight tangle can occur. Should a tangle occur, firstly turn the
appliance off and refrain from pulling the appliance away from the
hair. Gently tease the hair out from the ceramic chamber until fully
released.
