EN
46
6.1. Select the intensity level with CAUTION!
The power intensity level designates the power of the pulsed light administered to your
skin during treatment, ranging from the lowest (1) to the highest (5) levels.
The power indicator lights indicate the selected level of power. If you increase the power,
the results will be better, but there will also be an increased risk of side effects (cf. the
section “Possible side Effects”).
6. Use
CAUTION : 48 hours before using for the first time, do a test on a leg (a few flashes) using level
1, regardless of your skin type.
If your skin reacts correctly to the test, i.e. if you do not notice any abnormal reactions or discomfort in
the 48 hours following the test, you can select the power level of your appliance for your first session using
the following chart:
For the first session,
people with phototype 1 or II skin
should set the appliance to level 3 at most.
Gradually, over the next few sessions, if you do not experience any specific discomfort or unpleasantness,
the power level can be increased to level 4 and then to level 5.
For the first session,
people with phototype III or IV skin
should set the appliance to level 2 at most.
Gradually, over the next few sessions, if you do not experience any specific discomfort or unpleasantness,
the power level can be increased to level 3 then to level 4.
For the first session,
people with phototype V skin
should set the appliance to level 1 at most. Gradually,
over the next few sessions, if you do not experience any specific discomfort or unpleasantness, the power
level can be increased to level 2 then to level 3.
The Homelight appliance is not suitable for use by
people with phototype VI skin.
48.2
