• To attach a comb guide, ensure the appliance is
switched off. Position the comb guide over the
front of the clipper blade and slide over the head.
Push and click the rear of the comb guide into
position.
• To remove the comb guide, ensure the appliance
is switched off. Push the tab on the rear of the
comb guide away from the head and lift off
(Fig.1).
Taper Control
The easy-twist taper control enables fine cut adjustment for precision
clipping. Ideal to create the perfect fade or blending two lengths.
Note:
Set the tuning thumb wheel height to the maximum (3.0) before
re-attaching the blades are removal for cleaning.
Clipping
For an all over even cut:
• Attach a comb guide as required – your clipper is supplied with 8
comb guides (grades 1-8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Starting at the nape of the neck, hold the clipper with the teeth of the
clipper pointing upwards, ensuring that the comb guide is resting flat
against the head.
• Slowly move the clipper upwards and outwards through the hair
towards your crown, against the direction of the hair growth. The
comb guide will help to lift the hair and the blades will cut the hair at
the desired length.
• Once the desired length is achieved at the back of the hair, start
clipping the top and sides.
• Hold the clipper to the front of your hair with the teeth pointing
towards the back of your head, and move the clipper towards your
crown. Repeat as necessary, moving in rows from the front and the
sides of your head to the back.
• You should achieve an even length cut all over your head.
Fig.1
