Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades after every use.
• When using the oil for the first time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.
• Remove the blade guard and switch the appliance on.
• Holding the clipper at a 45 degree angle, gently squeeze the oil tube
and apply 2 drops directly onto the blades.
• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.
Charging the appliance
• The clipper is equipped with lithium ion batteries.
• Before using for the first time, the appliance should be fully charged
continuously for 3 hours. This initial super-charge ensures optimum
power performance to ensure smooth fast cutting every time.
Maximum battery capacity will only be reached after 3 charging and
discharging cycles.
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on.
• The charging indicator light will flash when the appliance is plugged
in and connected to the mains.
• When the appliance has finished charging the indicator light will stop
flashing and remain static.
• A 3 hour charge will provide approximately 160 minutes use. A 30
minute quick charge will provide approximately 30 minutes use.
NOTE:
Do not charge the appliance for longer than the recommended
time.
