0
AFTER AN ELECTROLYSIS SESSION
After each electrolysis session,
preferably after 2 hours, the hair
can be removed using a traditional
hair-removal method: tweezers, wax
or electric hair removal. The hair
should come out easily and without
resistance.
After hair removal, you can apply an
after hair-removal moisturising lotion
to soothe your skin.
LENGTH OF THE TREATMENT
The treatment should be carried out
once or twice a week. You will notice
the first results after a few weeks of
the treatment and these will increase
with prolonged and regular use of
the product.
The length of the treatment varies
depending on the area being treated
and the nature of the hair. Some
thicker hair may require longer
treatment. The hair should become
increasingly thinner, come out more
easily and finally disappear.
The session duration varies according
to the selected intensity : from to 4
minutes with patches, and from 20 to
60 seconds with precision stylet.
The intensity only has an impact on
the session duration, but not on the
efficiency.
RECOMMENDATIONS AND
CONTRA-INDICATIONS
• Only place the patches on areas
referred to in this manual. Do not
place near the heart, carotid artery,
genital organs or eyes.
• Do not use the patches or the stylet
on open wounds, cuts, burns, warts,
moles, sunburnt skin or varicose
veins. Do not use if you suffer from
a skin irritation or skin infection like
psoriasis or eczema.
• Do not use perfume or deodorant
on the treated area for 24 hours.
Seek medical advice before using this
appliance without medical advice if:
• you have an electronic implant
(pacemaker, etc.) or metal implant,
including an IUD;
• you suffer from heart problems;
• you are pregnant; or
• you suffer from cancer, epilepsy,
diabetes.
• Do not use on areas where there is
little sensitivity.
IMPORTANT: A slight redness on the
skin in the area where the patches
were placed and/or the stylet was used
is normal and will disappear quickly.
Stop treatment and consult a doctor if
the redness persists.
While treating the upper lip, you may
become aware of a metallic taste. This
is normal and is a result of the electrical
current. The after-taste disappears
when the current is stopped.
MAINTENANCE OF THE APPLIANCE
The appliance does not require
special maintenance. To clean, wipe
with a damp cloth. Never allow
water to get inside, do not leave the
appliance in the sun or in extreme
temperatures.
The patches
IMPORTANT: to remove the patches,
carefully pull on the edges. Never
pull by the wires. The patches have
a limited life depending on the
frequency of use (approximately 50
moving on the skin, on average),
conditions of use, maintenance, and
so on. When they no longer adhere
properly, they must be replaced.
